Toll Free: 800-431-2912 (USA ONLY)

My Account   |   Contact Us   |   Careers     

Texas Instruments MAX3223IPWR 3- to 5.5-V Dual Channel 250kbps RS-232 Line Driver/Receiver With +/-15-kV ESD Protection

Please call 845-790-9900 for a quote or send an RFQ through our “Request for Quote” tab.

2/2 Transceiver Full RS232 20-TSSOP


Description

Item Description:

The MAX3223 consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The device operates at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate. Flexible control options for power management are available when the serial port is inactive. The auto-powerdown feature functions when FORCEON is low and FORCEOFF\ is high. During this mode of operation, if the device does not sense a valid RS-232 signal, the driver outputs are disabled. If FORCEOFF\ is set low and EN\ is high, both drivers and receivers are shut off, and the supply current is reduced to 1 µA. Disconnecting the serial port or turning off the peripheral drivers causes auto-powerdown to occur. Auto-powerdown can be disabled when FORCEON and FORCEOFF\ are high. With auto-powerdown enabled, the device is activated automatically when a valid signal is applied to any receiver input. The INVALID\ output is used to notify the user if an RS-232 signal is present at any receiver input. INVALID\ is high (valid data) if any receiver input voltage is greater than 2.7 V or less than –2.7 V or has been between –0.3 V and 0.3 V for less than 30 µs. INVALID\ is low (invalid data) if the receiver input voltage is between –0.3 V and 0.3 V for more than 30 µs. Refer to Figure 4 for receiver input levels.

Product Specs:

Brand Texas Instruments
MPN MAX3223IPWR
Model MAX3223
Drivers per package 2
Receivers per package 2
Logic voltage (min) (V) 3.3
Data rate (max) (Mbps) 0.25
Main supply voltage (nom) (V) 3.3, 5
Features Auto-Powerdown
ESD HBM (kV) 15
Rating Catalog
Operating temperature range (°C) -40 to 85
Vout (typ) (V) 5.4

Request a Quote

    Part Details

    Contact Information

    * Fields marked are required for submission.

    Contents © DERF Electonics, Inc. All Rights Reserved.   |   Site powered by Surfside Web