Description
Item Description:
The new HID Mercury MR Series 3 Serial Input/Output modules enable system expansion of HID Mercury intelligent controllers as part of HID’s distributed architecture. The enhanced modules offer an improved processor and increased memory, plus feature an embedded crypto memory chip that provides a secured layer of encryption to onboard sensitive data. Built on the HID Mercury open platform, Series 3 modules provide the necessary flexibility for OEMs, channel partners and end customers to choose the controller configuration that best fits their needs. The MR62e Series 3 is an IP-enabled interface module with on-board flexibility to connect a wide range of security devices. The MR62e is easy to install and provides the required I/O for interfacing four card readers using OSDP protocol, six general-purpose input monitor points and four control relays to any HID Mercury intelligent controller. The MR62e provides increased power output using PoE+ and provides one reader port supporting OSDP Secure Channel readers, including non-keypad, keypad and biometric readers. System configuration and setup are provided through HID Mercury OEM partner software applications. The MR62e Series 3 is the latest generation door interface module for HID Mercury intelligent controllers, the platform of choice for customers seeking open architecture access control solutions.
Product Specs:
| Brand | Mercury |
| MPN | MR62e |
| Model | Series 3 |
| Door Control | • Natively supports up to 4 OSDP. Does not support Wiegand readers • MR62e, when linked to an HID Mercury Intelligent Controller, controls up to 2 openings |
| Card Formats | • Eight active card formats per intelligent controller • Entire card number reported on invalid read • 19 digit (64-bit) User ID and 15 digit PIN numbers maximum • PIV, CAC, TWIC card compatible |
| Power Input | PoE (12.95 W), compliant to IEEE 802.3af or PoE+ (25 W), compliant to IEEE 802.3at or 12 VDC ± 10 %, 1.7 A maximum |
| Power Output | • PoE: Locks and Reader, combined: 12 VDC @ .66 A MAX • PoE+ or 12 VDC: Lock 12 VDC @ 1 A MAX • Readers 12 VDC @ .5 A MAX |
| Output | Four relays, Form-C contacts rated at 2 A @ 30 VDC |
| Inputs | Six unsupervised/supervised, End of Line resistors, 1k/1k ohm, 1%, ¼ watt standard |
| Power | 12 VDC @ .5 A MAX |
| Communication | 2-Wire RS-485, OSDP protocol, four devices maximum |
| Ethernet | CAT-5, minimum |
| External Input Power | 1 twisted pair, 18 AWG (if required) |
| Alarm Inputs | 1 twisted pair per input, 30 ohm maximum |
| Relay Outputs | As required for the load |
| Reader Data RS-485/Power | • 2 twisted pair with shield, 24 AWG, 120 ohm impedance, 4000 foot (1220 m) max or RS-485: 1 twisted pair with shield, 24 AWG, 120 ohm impedance, 4000 foot (1220 m) max • Power: 1 pair 18 AWG |
| Temperature | Storage: -55° to 85° C Operating: 0° to 70° C |
| Humidity | 5 to 95% RHNC |
| Dimensions | 5.5 in. (140 mm) W x 2.75 in. (70 mm) L x 0.96 in. (24 mm) H without bracket 5.5 in. (140 mm) W x 3.63 in. (92 mm) L x 1.33 in. (34 mm) H with bracket |
| Weight | 4 oz. (112 g) without bracket 5 oz. (142 g) with bracket |
