Description
Item Description:
2 Position Wire to Board Terminal Block Vertical with Board 0.200″ (5.08mm) Through Hole
Product Specs:
| Brand | Phoenix Contact |
| MPN | 1712724 |
| Model | MKDSF 3/ 2-5,08 |
| Type | PC terminal block can be aligned |
| Number of positions | 2 |
| Pitch | 5.08 mm |
| Number of connections | 2 |
| Number of rows | 1 |
| Number of potentials | 2 |
| Pin layout | Linear pinning |
| Solder pins per potential | 1 |
| Nominal current IN | 24 A |
| Nominal voltage UN | 400 V |
| Rated voltage (III/3) | 250 V |
| Rated surge voltage (III/3) | 4 kV |
| Rated voltage (III/2) | 400 V |
| Rated surge voltage (III/2) | 4 kV |
| Rated voltage (II/2) | 630 V |
| Rated surge voltage (II/2) | 4 kV |
| Nominal cross section | 2.5 mm² |
| Connection method | Screw connection with tension sleeve |
| Conductor cross section rigid | 0.2 mm² … 4 mm² |
| Conductor cross section flexible | 0.2 mm² … 2.5 mm² |
| Conductor cross section AWG | 24 … 12 |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² … 2.5 mm² |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² … 2.5 mm² |
| 2 conductors with same cross section, solid | 0.2 mm² … 1.5 mm² |
| 2 conductors with same cross section, flexible | 0.2 mm² … 1.5 mm² |
| 2 conductors with same cross section, flexible, with ferrule without plastic sleeve | 0.25 mm² … 0.75 mm² |
| 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve | 0.5 mm² … 1.5 mm² |
| Stripping length | 8 mm |
| Drive form screw head | Slotted (L) |
| Tightening torque | 0.5 Nm … 0.6 Nm |
| Mounting type | Wave soldering |
| Pin layout | Linear pinning |
| Contact material | Cu alloy |
| Surface characteristics | hot-dip tin-plated |
| Metal surface terminal point (top layer) | Tin (4 – 8 µm Sn) |
| Metal surface soldering area (top layer) | Tin (4 – 8 µm Sn) |
| Color (Housing) | green (6021) |
| Insulating material | PA |
| Insulating material group | I |
| CTI according to IEC 60112 | 600 |
| Flammability rating according to UL 94 | V0 |
| Glow wire flammability index GWFI according to EN 60695-2-12 | 850 |
| Glow wire ignition temperature GWIT according to EN 60695-2-13 | 775 |
| Temperature for the ball pressure test according to EN 60695-10-2 | 125 °C |
| Width [w] | 10.13 mm |
| Height [h] | 15.2 mm |
| Length [l] | 20.65 mm |
| Installed height | 11.12 mm |
| Solder pin length [P] | 4.08 mm |
| Pin dimensions | 0.9 x 0.9 mm |
| Hole diameter | 1.3 mm |
| Ambient temperature (operation) | -40 °C … 100 °C (Depending on the current carrying capacity/derating curve) |
| Ambient temperature (storage/transport) | -40 °C … 70 °C |
| Relative humidity (storage/transport) | 30 % … 70 % |
| Ambient temperature (assembly) | -5 °C … 100 °C |
