Description
Item Description:
The Model B110LP detector base is designed for use with System Sensor models 2151 photoelectronic and 1151 ionization detector heads. This two-wire base is equipped with screw terminals for the connection of power, ground, and an optional remote annunciator.
Product Specs:
| Brand | System Sensor |
| MPN | B110LP |
| Model | B110LP |
| Base Diameter | 6.2 inches (157 mm) |
| Base Height | 0.95 inches (24 mm) |
| Weight | 0.3 lb. (137 g) |
| Mounting | 4-inch square box with or without plaster ring. Min. depth–1.5 inches
3-1/2-inch octagon box. Min. depth–1.5 inches |
| Operating Temperature Range | 0° to 49°C (32° to 120°F) |
| Operating Humidity Range | 10% to 93% Relative Humidity, Noncondensing |
| System Voltage | 12/24 VDC |
| Maximum Ripple Voltage | 4 Volts peak-to-peak |
| Start-up Capacitance | 0.02 µF Maximum |
| Standby Ratings | 8.5 VDC Minimum
35 VDC Maximum 120 µA Maximum |
| Alarm Ratings | 4.2 VDC Minimum at 10 mA
6.6 VDC Maximum at 100 mA (Alarm current must be limited to 100 mA (130 mA for models 1151 and 2151) by the control panel. If it is used, the RA400Z Remote Annunciator operates within the specified detector alarm currents.) |
| Reset Voltage | 2.5 VDC Minimum |
| Reset Time | 0.3 Seconds Minimum |
| Start-up Time | 34.0 Seconds Maximum |
